Viking stoves are known for their high-quality craftsmanship and reliable performance. However, even the best appliances require maintenance and occasional repairs. One issue that may arise with your Viking stove is a faulty igniter, which can prevent the burner from lighting.
This blog will explain a step-by-step guide on how to perform Viking Stove Igniter Replacement. But before we get started, it is important to note that working with gas appliances can be dangerous.
If you are uncomfortable working with gas or unsure of your abilities, it is best to call a professional to perform a Viking stove repair to get the job done correctly.
Viking Stove Igniter Replacement: Tools and Materials
To replace the igniter on a Viking stove, you will need the following tools and materials:
- New igniter (make sure it is compatible with your Viking stove model)
- Wire cutters/strippers
- Electrical tape
Steps to Replacing an Igniter
Here are the six simple steps to replacing your Viking stove igniter:
Step 1: Turn Off the Gas
Before you begin, turn off the gas supply to your Viking stove by turning the valve behind it to its “off” position.
Step 2: Remove the Grates and Burners
Remove the burner caps and grates from your stovetop to access the burner assembly. Carefully remove the burner base by lifting it straight up and pulling it away from the igniter. You may need pliers to disconnect the igniter’s wires to the burner assembly.
Step 3: Remove the Old Igniter
Once you have access to the igniter, remove it by unscrewing the mounting screws that hold it in place. Carefully disconnect the wires from the old igniter, noting where each wire is connected.
Step 4: Install the New Igniter
Install the new igniter by attaching the wires to the appropriate connectors and securing it with the mounting screws. Use some electrical tape to secure any loose wires.
Step 5: Reassemble the Burner Assembly
Reassemble the burner assembly by reconnecting the wires and placing the burner base back into place. Make sure that the wires are not pinched or damaged in the process. Once the burner assembly is in place, replace the burner caps and grates.
Step 6: Test the Igniter
Turn on the gas supply and test the igniter by turning on the burner. If the burner lights, you have successfully replaced the igniter on your Viking stove.
Viking Stove Maintenance
Regular maintenance can help prevent issues with your Viking stove, including a faulty igniter. Here are some tips for Viking stove maintenance to keep your Viking stove in good working condition:
- Clean your stove regularly using a gentle cleaning solution and a non-abrasive scrubber.
- Check the burners and igniters for any signs of wear and tear, including cracks or discoloration.
- Avoid using abrasive cleaners or harmful chemicals and materials on your stove, as these can damage the finish and cause scratches.
- Have your Viking stove serviced by a professional Viking stove cleaning service at least once a year to ensure it operates safely and efficiently.
Replacing the igniter on your Viking stove is a simple process that can save you money and time. However, you should still know when to step back and call for a professional Viking stove repair service.
At Viking Appliance Repairs, you can count on us anytime to replace any components in your Viking stove. We provide Viking stove services that include troubleshooting, repair, cleaning, and maintenance.
If you’re looking for a Viking stove repair near me, our service is the one you can get immediate help from. We offer same-day repairs that cater to the urgent repair needs of Viking homemakers. Call us through our hotline at (855) 393-3634.